以人为本 以奋斗为本 People-oriented struggle-oriented
Back to the top

How to install a notebook solid state drive?

日期: 2017-11-28
浏览次数: 196

   The slow reading of the notebook, the speed of the boot, the loss of data from time to time, etc. are unbearable, causing the work game to face a collapse situation. Most of this is due to the damage of the hard disk, which is not economical and is not willing to accompany itself for many years. In the case of a computer, we can choose to replace the notebook hard drive.

笔记本固态硬盘如何安装?


   Considering that the solid state drive has a faster transmission speed and reading speed than the mechanical hard disk, in order to make the notebook computer have a larger improvement, the Rising S300 PRO solid state hard disk is used instead of the original mechanical hard disk. With the selection of MLC original granules, the Swiss S300 PRO is a good choice for SSDs while maintaining sufficient capacity for longer life, stable performance and fast transfer.


笔记本固态硬盘如何安装?

   

   The following is the installation procedure for the notebook hard drive.


   Prepare the notebook hard drive cover before disassembling it. Have a Phillips screwdriver, don't be too big, the screws of the notebook are generally small; make sure the notebook is turned off, the power is disconnected, and the battery is taken out to ensure safe replacement.

 

   When it is safe, remove the back cover where the hard disk is located. The back of the notebook is usually equipped with a special cover for the hard disk. You only need to remove the part to complete the replacement. However, some notebooks are integrated and need to be removed. At this time, be careful not to damage other hardware and avoid unnecessary damage. 


笔记本固态硬盘如何安装?


   Before removing the hard disk, you must make sure that the screws connected to the hard disk and the notebook are all unscrewed before the removal can be performed. Find the location of the hard disk interface, press and hold the hard disk to push to the opposite side of the interface, and the hard disk socket is separated from the notebook. At this time, the hard disk can be taken out and become a single individual. Be careful not to pull the plastic piece on the hard disk directly to avoid damage.


笔记本固态硬盘如何安装?


   After the hard disk is removed, you need to remove the protection bracket of the hard disk before you can replace it with a new one. Unscrew the screws on the bracket. The screws of the bracket are generally at the bottom or side of the hard disk. You should observe and screw them out. After the screw is unscrewed, the main body of the hard disk can be taken out and all the removals can be completed.

笔记本固态硬盘如何安装?


   Replace with a new solid state drive. Put the new SSD into the hard drive bracket and tighten the screws, put it into the notebook hard drive slot, push the hard drive into the interface, fix the screws, and replace the back cover to complete the replacement of the entire hard drive. After replacing the new hard drive, the notebook needs to be re-distributed and the system installed.


笔记本固态硬盘如何安装?


   Is the partition for the SSD the same as the mechanical hard disk? Please lock in the Swiss public number and you will be careful.


Long press the identification QR code to follow us~

Come at a speed, because of beauty


  About Ramsta  


Ruishi International Headquarters is located in Hong Kong and Taiwan. It has set up a research and development center in Shenzhen. It has set up a sales company in Shenzhen. It has a storage product R&D and manufacturing base in Taiwan and Shenzhen. It is committed to the research and development and manufacturing of high-end, cutting-edge storage products. Rui Shi established the Greater China Marketing Center in Shenzhen. As a professional storage product R&D, manufacturing and sales integration service provider, Ruishi currently has a place in the SSD solid state drive, DARM module memory, TF flash card and other series of storage products.


固态硬盘你们了解多少?



201, building 1, Meitai Industrial Park, No. 1231, sightseeing Road, Guihua community, Guanlan street, Longhua New District, Shenzhen
Phone:400 900 2289
传真:+86 0755-2788 8009
邮编:330520
Copyright@ 2019-2023 Ramsta International All rights reserved
Xiniu provides enterprise cloud services
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-900-2289
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开