以人为本 以奋斗为本 People-oriented struggle-oriented
Back to the top

How to replace the notebook memory?

日期: 2017-11-24
浏览次数: 117


   'The notebook has been used for a long time, want to throw it? Let's take a look at this article. The main reason mentioned in the article is that the laptop is running and the software is automatically logged out. When the memory damage is not applicable and the memory is upgraded, you need to replace the memory. How to replace it? The following is a notebook memory replacement method, the new technology will be GET.


   The location of the notebook memory hard disk is generally equipped with a special cover on the back and marked with a memory and a hard disk logo. The special cover with the logo can be used to quickly replace the notebook memory hard disk. What needs to be popular here is that some notebooks use an integrated back cover, so you need to open the entire cover. At this time, basic accessories such as notebook memory, heat sink, chip and hard disk are exposed, and you should be careful when replacing the memory. In order to avoid accidentally damage other accessories, destroy the overall performance of the notebook.


笔记本内存如何更换?


   The first step is to remove the back cover. This example notebook has a notebook with a special cover for hard disk memory, so you only need to open this part of the cover to make a memory change. Be careful to turn off the power, unplug the power adapter, and take out the battery before removing the cover. Unscrew all visible screws and check if some of the screws are hidden under the feet or feet. All the screws should be found and screwed out to open the cover to avoid damage to the cover. As shown in the figure below, the hard disk is on the left and the memory is on the right.


笔记本内存如何更换?


In the second step, we removed the notebook's own memory stick. Carefully observe the two spring clips on both sides of the memory, gently pull the buckles on both sides, the memory will automatically pop up, and easily take off the notebook's own memory. After the removal, the card slot is cleaned, which is beneficial to the better performance of the memory. The notebook memory card slot has a single channel or dual channel. This notebook has dual channels. If you want the notebook to have a faster running speed, you can consider plugging in two memories. The dual channel memory can improve the performance of the notebook. In addition, you need to pay attention to the type of memory supported by the notebook. The card slot basically indicates the type of memory supported. This requires priority viewing to avoid incompatibility caused by buying the wrong memory module or the card slot is not applicable.


笔记本内存如何更换?


   The third step is to install the new memory. This time, we use the 4G DDR3 dedicated memory of the Swiss version of the Sirius series notebook. The original granules of the Swiss notebook memory are selected, and the production is strictly controlled and the quality is guaranteed. There is a convex point on the left side of the notebook memory card slot, and the memory bar is also provided with a groove on the left side of the memory card. This is a memory-specific anti-insertion design, which effectively prevents the memory bar from being inserted backward. The new memory module is inserted and inserted at an angle of 30°. After inserting it, gently press it down until it clicks. At this time, the buckle has been buckled and it is confirmed that it is not loose, indicating that the memory module has been installed. After the problem, cover the cover and tighten the screws.


笔记本内存如何更换?


The final step is to check if the new memory stick is recognized by the system. Open the notebook and right click on the computer or my computer to enter the properties, you can see the memory capacity. If you can see, the memory is replaced successfully. If the computer fails to boot, it means the memory is loose or the golden finger is not clean. The memory module needs to be cleaned and reinserted for normal use.

笔记本内存如何更换?


Long press the identification QR code to follow us~

Come at a speed, because of beauty


  About Ramsta  


Ruishi International Headquarters is located in Hong Kong and Taiwan. It has set up a research and development center in Shenzhen. It has set up a sales company in Shenzhen. It has a storage product R&D and manufacturing base in Taiwan and Shenzhen. It is committed to the research and development and manufacturing of high-end, cutting-edge storage products. Rui Shi established the Greater China Marketing Center in Shenzhen. As a professional storage product R&D, manufacturing and sales integration service provider, Ruishi currently has a place in the SSD solid state drive, DARM module memory, TF flash card and other series of storage products.


固态硬盘你们了解多少?


201, building 1, Meitai Industrial Park, No. 1231, sightseeing Road, Guihua community, Guanlan street, Longhua New District, Shenzhen
Phone:400 900 2289
传真:+86 0755-2788 8009
邮编:330520
Copyright@ 2019-2023 Ramsta International All rights reserved
Xiniu provides enterprise cloud services
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-900-2289
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开