以人为本 以奋斗为本 People-oriented struggle-oriented
Back to the top

The beauty of the world, the sense of speed, the cool SSD is ready for you

日期: 2017-09-27
浏览次数: 100

   Since Intel released SkyLake's six-generation Core processor family in August 2015, with the 100 series motherboards that have appeared at the same time, the memory has officially entered the DDR4 era. The seven-generation Kaby Lake Core processor family and 200 series motherboards, and the eight-generation Core processor family and the upcoming 300 series motherboards, all released, fully support DDR4 memory.


盛世美颜 极速之感 炫酷SSD为你而准备


   The lower part of the DDR4 desktop memory is designed to be slightly curved in the middle and the edge is short. The contact point between the gold finger and the memory has enough contact surface for more stable signal transmission. The DDR4 uses 3DS stacking technology, and the capacity of a single memory can be made. To a larger, multi-channel memory full can achieve 128GB capacity; DDR4 operating voltage will be further reduced to 1.2V, and even there may be 1.1V/1.05V ultra-low voltage energy-saving version, even DDR4-3000 frequency The operating voltage is only 1.35V; each pin of DDR4 memory can provide 2Gbps (256MB/s) bandwidth. The higher the frequency, the faster the transmission speed. The DDR4 starting frequency is up to 2133MHz, and the highest is 4266MHz. 


盛世美颜 极速之感 炫酷SSD为你而准备


   As chip processes get closer to physical limits, chip manufacturing techniques are becoming more difficult. Starting with the 7th generation 14nm Core processor family, Intel's 'Tick-Tock' model has been shut down, completely breaking the 'process-architecture' pendulum strategy and moving to 'Process-Architecture-Optimization' (PAO) The three-step strategy.


盛世美颜 极速之感 炫酷SSD为你而准备


   We all know that Intel's CPUs are matched with the corresponding series of motherboards. For example, the six generations come standard with 100 series motherboards, and the seven generations come standard with 200 series motherboards. However, since the six generations and seven generations of Core are all LGA1151 interfaces, there will be a mix of market demand and inventory pressure. For this reason, Intel can support the six-generation processor family after the BIOS upgrade for the 200 series motherboards, and the 200 series motherboards can directly support the six-generation processor family.

    In the process of CPU replacement and motherboard chipset upgrade, in addition to performance optimization, the 200 series began to support Optane disk technology, the number of PCIe channels increased, the most important function is the default frequency of the motherboard memory from the 6133+100 series chipset 2133MHz Upgrade to 2400MHz of the 7th generation +200 series chips.


盛世美颜 极速之感 炫酷SSD为你而准备


   So now it is time to start knocking on the blackboard: When the CPU and the motherboard are mixed and mixed, you must pay attention to the selected memory frequency. Otherwise, it will cause partial incompatibility and not a problem, but not the memory itself. The easiest collocation strategy is: In addition to the CPU + Z170/Z270 with K support overclocking can be overclocked to adapt to high frequency memory, the 7th generation processor family +200 series motherboards are recommended to use 2400MHz memory, any other mix or six generations The +100 series is recommended to use 2133MHz memory. The upcoming 300 series motherboards are only recommended to use 2400MHz memory when paired with eight generations of processors. If it is an intergenerational mashup, please confirm whether the motherboard BIOS has upgrade support. For details, please refer to the official website description of each motherboard.


盛世美颜 极速之感 炫酷SSD为你而准备


   During the installation and upgrade process, you must pay attention to the memory frequency of the adapter platform. Memory is a passive device, and its adaptation frequency is limited by the platform itself, not by the memory itself. Only with the correct combination, can the platform work stably, the Swiss squad series DDR4 memory, the full range of vest upgrades, so that you can use more comfortable.


   With the main CPU and chipset generation diagram:


盛世美颜 极速之感 炫酷SSD为你而准备


   Ruishi International adheres to the ultimate standards and strict quality control, making Ruishi storage better, more beautiful, more stable, faster and stronger. The DDR4 desktop memory of the Swiss Tiave series is fully upgraded, and the value and performance are more matched, bringing the ultimate experience and selling hot.


Scan the QR code below to follow us~

Come at a speed, because of beauty



  About Ramsta  


Ruishi International Headquarters is located in Hong Kong and Taiwan. It has set up a research and development center in Shenzhen. It has set up a sales company in Shenzhen. It has a storage product R&D and manufacturing base in Taiwan and Shenzhen. It is committed to the research and development and manufacturing of high-end, cutting-edge storage products. Rui Shi established the Greater China Marketing Center in Shenzhen. As a professional storage product R&D, manufacturing and sales integration service provider, Ruishi currently has a place in the SSD solid state drive, DARM module memory, TF flash card and other series of storage products.


固态硬盘你们了解多少?


201, building 1, Meitai Industrial Park, No. 1231, sightseeing Road, Guihua community, Guanlan street, Longhua New District, Shenzhen
Phone:400 900 2289
传真:+86 0755-2788 8009
邮编:330520
Copyright@ 2019-2023 Ramsta International All rights reserved
Xiniu provides enterprise cloud services
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 4006-900-2289
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开